Contact Us

If you still have questions or prefer to get help directly from an agent, please submit a request.
We’ll get back to you as soon as possible.

Please fill out the contact form below and we will reply as soon as possible.

  • Contact Us
English (US)
US English (US)
ES Spanish
IT Italian
  • Home
  • Hardware & Deployment
  • Frequently Asked Questions (FAQ)
  • PAN-42 Sensor FAQs

If we have a PAN-42 installed, can we automatically use its measured power factor for subsequent downstream sensors?

Written by Omri Landman

Updated at April 30th, 2025

Contact Us

If you still have questions or prefer to get help directly from an agent, please submit a request.
We’ll get back to you as soon as possible.

Please fill out the contact form below and we will reply as soon as possible.

  • Using the Platform
    Getting Started Administration Energy Applications Triggers and Notification Center Data Export Data Import Reports
  • Hardware & Deployment
    Frequently Asked Questions (FAQ) Hardware Datasheets and Deployment Guides Software Deployment Guide Troubleshooting Flow Charts
  • Interactive Demos
  • Legal
+ More
Short answer is no. Power Factor is not the same identically across the site or panel hence to get the accurate Power Factor, a PAN-42 must be installed on the specific device. 
automatic integration power factor

Was this article helpful?

Yes
No
Give feedback about this article

Related Articles

  • Can I use the PAN-42 for sub metering applications?
  • 2 of the 3 phases on my PAN-42 are showing reflected/mirrored power factors. How is that possible?
  • Is PAN-42 a utility/revenue-grade meter?
Expand